Krückemeyer · adhesive tape
Capra Grip I - Universal - Grey anti-slip tape - 50 mm x 18.3 m
Capra Grip I 65663 - Universal grey anti-slip tape, 50 mm x 18.3 m, PVC backing, solvent-based acrylic adhesive, silicone paper liner, -40 to +80 °C.
Each variant is a separate article with its own page – your selection opens the sibling variant.
Fig. 01 — Product view
Dimensions
| Width in mm | 50 mm |
|---|---|
| Length in m | 18,3 m |
| Thickness in mm | 0,72 |
Product description
Capra Grip I 65663 at a glance
The Capra Grip I Universal grey anti-slip tape – 50 mm wide and 18.3 m long – belongs to the Capra Grip family. The PVC backing provides a robust base, while the solvent-based acrylic adhesive enables reliable adhesion to many substrates. The silicone paper liner protects the adhesive layer until application. With a thickness of 0.72 mm, the tape offers a good balance between load-bearing capacity and conformability on larger surfaces.
As a bestseller in the Capra Grip line, it combines anti-slip and slip-resistant properties with chemical-resistant performance, ideal for demanding industrial environments. The temperature resistance ranges from -40 °C to +80 °C, allowing reliable performance in cold or warm zones.
Suitable for slip-resistant surfaces in industrial environments
This adhesive tape is used to make work surfaces, stair treads, platforms and other areas requiring secure footing safer. The grey colour provides good visibility, while the adhesive ensures lasting adhesion. Thanks to its broad temperature suitability, Capra Grip I can be used in changing process environments.
Construction and materials
The Capra Grip I tape system is based on a PVC backing with a solvent-based acrylic adhesive. The liner consists of silicone paper. The dimensions are 50 mm in width and 18.3 m in length, with a thickness of 0.72 mm.
Technical data
- Width: 50 mm
- Length: 18.3 m
- Thickness: 0.72 mm
- Backing material: PVC
- Adhesive: Solvent-based acrylic
- Liner: Silicone paper
- Colour: grey
- Temperature resistance: -40 °C to +80 °C
Features and benefits
- Anti-slip / slip-resistant: Increases safety on wet or smooth surfaces
- Chemical-resistant: Suitable for harsh industrial environments
- Large format: Long dimensions enable efficient installation
- Silicone paper liner: Protects the adhesive layer until use
Bestseller status and scope of use
Capra Grip I is established as a bestseller in the anti-slip adhesive tape segment. The combination of robust PVC backing, chemical-resistant adhesive and long dimensions makes it a reliable solution for safety and marking in industrial environments.
Product Properties
| Klebstoff | Loesemittelacrylat |
|---|---|
| Abdeckung | Silikonpapier |
| Temperaturee resistance | minus 40 °C bis plus 80 °C |
| Trägermaterial | PVC |
Sonderanfertigungen
Custom-cut rolls
Made-to-measure
Cross-wound spools
Kilometer-long narrow tapes
Sheet stock | Sheets
Custom dimensions
Adhesive die-cut parts
Custom 2D shapes
Adhesive dots
Custom diameters
Adhesive tapes
Custom dimensions
Advice on this product
Krückemeyer technical support
Technical sales
Not sure whether this product fits your application? Our technical sales team checks your requirements, samples alternatives and quotes custom-made solutions.