Capra Grip III - Wet area fine - Anti-slip tape gray - 50 mm x 18.3 m

Capra Grip III – Wet area fine (66689) at a glance

The Capra Grip III – Wet area fine from the Krückemeyer Capra Grip range is a single-sided adhesive tape for creating slip-resistant wet areas. With its PVC backing and solvent-based acrylic adhesive, it offers a resilient solution for heavily used surfaces. It is lined with silicone paper, which enables reliable transport and installation. The dimensions are 50 mm wide and 18.3 m long, with a thickness of 0.71 mm. The temperature range extends from -30 °C to +70 °C, allowing use in many industrial environments. The product is designated a bestseller and is particularly suitable for damp, dirty or chemically exposed surfaces.

• Width: 50 mm
• Length: 18.3 m
• Thickness: 0.71 mm
• Backing material: PVC
• Adhesive: Solvent-based acrylic
• Liner: Silicone paper
• Temperature range: -30 °C to +70 °C

Suitable for wet areas and slip-resistant surfaces

This tape meets the requirements for slip-resistant applications in wet areas. The solvent-based acrylic adhesive ensures good adhesion to wet, smooth surfaces, while the robust PVC backing increases durability in damp rooms. Thanks to its chemical-resistant formulation, the tape maintains adhesion longer even when exposed to cleaning agents and moisture.

Technical data

• Width: 50 mm
• Length: 18.3 m
• Thickness: 0.71 mm
• Backing material: PVC
• Adhesive: Solvent-based acrylic
• Liner: Silicone paper
• Temperature range: -30 °C to +70 °C

Construction and material details

Backing and adhesive

The tape is constructed from a PVC backing bonded to a solvent-based acrylic adhesive. The silicone paper liner protects the adhesive surface until installation. This combination of materials ensures robust adhesion under wet conditions and stress.

Application guidance

1. Clean the surface, ensuring it is dry and free of grease.
2. Remove the liner paper and align the tape on the intended surface.
3. Press down firmly and evenly and remove air bubbles.