RK 110 Aluminum Adhesive Tape - 1360 mm x 50 m

RK 110 Aluminum Adhesive Tape at a Glance

RK 110 Aluminum Adhesive Tape from Krückemeyer is a single-sided aluminum foil adhesive tape with an acrylic adhesive and an external PE liner. It is used for permanent bonding on metal surfaces, insulation materials and in areas where moisture or heat may occur. The width is 1360 mm, the length 50 m, the thickness 0.06 mm and the core 76 mm. The aluminum foil backing combines strength with good conformity to surface profiles, while the adhesive ensures reliable adhesion even on smooth and textured surfaces.

With a temperature range of -20 °C to +100 °C, the tape maintains its adhesion in typical industrial applications. The external PE liner protects the adhesive layer until use and makes unwinding easier. This item is considered a bestseller in our range, confirming its proven performance in demanding applications.

Suitable for Metal and Insulation Work

Thanks to the aluminum foil, the tape adheres reliably to metal surfaces, while the acrylic adhesive ensures lasting adhesion even under temperature changes. The combination of flexible backing material and stable bonding allows good conformity to edges and contours – ideal for sealing, gaskets and insulation cladding.

Dimensions and Specifications

• Width: 1360 mm
• Length: 50 m
• Thickness: 0.06 mm
• Core: 76 mm
• Adhesive: Acrylic
• Backing Material: Aluminum foil
• Liner: External PE liner
• Temperature Range: -20 °C to +100 °C

Aluminum Adhesive Tape Construction

• Backing Material: Aluminum foil
• Adhesive: Acrylic
• Liner: External PE liner
• Total Thickness: 0.06 mm

Temperature Resistance and Handling

The adhesive layer and aluminum backing enable reliable adhesion across the entire temperature range. The PE liner ensures easy handling during unwinding and removal of the protective layer, allowing precise tape positioning.

Application Tips

1. Ensure surfaces are cleaned and degreased.
2. Plan the dimensions of the adhesive tape side and measure a suitable length.
3. Remove the PE liner gradually and press down flush.
4. Smooth contours and edges with your thumb or a smoothing tool.