RK 530 Crepe Masking Tape - 38 mm x 50 m

RK 530 crepe masking tape at a glance

The RK 530 crepe masking tape from Krückemeyer is a single-sided crepe tape with a stabilised backing and rubber adhesive. At 38 mm wide and 50 m long, it is ideal for industrial masking and bonding applications. Its thickness is 0.13 mm and its core has a diameter of 76 mm. Its continuous temperature resistance spans -30 °C to +80 °C, and briefly up to 100 °C (30 minutes).

As a single-sided crepe tape, it offers reliable, easy handling when masking and covering surfaces, particularly where clear coverage and clean removal are required.

Suitable for masking and bonding work

Masking and covering work

Thanks to the stabilised crepe backing, the tape can be positioned neatly, rubbed down easily and adheres reliably to typical surfaces being covered without leaving oily residue.

Bonding application

The rubber adhesive provides robust adhesion to the substrate and allows prompt removal without leaving residue.

Technical data for RK 530 crepe masking tape

• Width: 38 mm
• Length: 50 m
• Thickness: 0.13 mm
• Core: 76 mm
• Backing material: Stabilised crepe
• Adhesive: Rubber
• Continuous temperature resistance: -30 °C to +80 °C
• Short-term temperature resistance: 100 °C (30 minutes)

Construction: stabilised crepe tape

The tape is based on a stabilised crepe backing that retains its shape when removed and tears in a controlled manner. The rubber adhesive provides adhesion, while the standardised 76 mm core enables mounting on common dispensers.

Application instructions

1. Check the surface and remove dust before application.
2. Tear off and position a piece of tape of the planned length.
3. Press the tape down firmly; remove it cleanly after completion.