RK 553 crepe masking tape - 48 mm x 50 m

RK 553 crepe masking tape at a glance

The RK 553 crepe masking tape from Krückemeyer is a single-sided adhesive crepe tape made from stabilised crepe with rubber adhesive. With a width of 50 mm and a roll length of 50 m, it offers a robust solution for manual masking and bonding applications. The thickness is 0.15 mm and the core has a diameter of 76 mm, making it easier to use in standard dispensers. Temperature resistance ranges from -30 °C to +80 °C, making it suitable for painting and masking work in changing environments.

Suitable for masking and contour protection

The tape is ideal as a masking tape for painting and workshop use. Its stabilised crepe backing conforms well to contours, cracks and surfaces and enables clean masking even on complex shapes.

Technical data for RK 553 crepe masking tape

• Width: 50 mm
• Length: 50 m
• Thickness: 0.15 mm
• Core: 76 mm
• Backing material: Stabilised crepe
• Adhesive: Rubber
• Temperature resistance: -30 °C to +80 °C

Features & benefits

The stabilised crepe backing allows the tape to conform perfectly to contours and provides opaque coverage without rippling. The rubber adhesive ensures reliable adhesion to typical substrates such as paper or surfaces, while the width of 50 mm and length of 50 m enable efficient working.

Application tips

1. Prepare the surface: clean, dry and free from dust.
2. Position the dispenser and pull off the desired length of tape.
3. Apply the tape without creases and press down evenly, following the contours.
4. After masking, gently remove the adhesive strip without leaving marks.

Construction & material

Construction: crepe backing made from stabilised crepe with rubber adhesive. This combination provides flexibility around contours and reliability during masking work.

Temperature resistance

The tape remains flexible and adhesive across a broad temperature range, making it suitable for indoor and outdoor applications.