RK 621 G Plasterer's Tape - 30 mm x 33 m

Krückemeyer RK 621 G plasterer's tape at a glance

The RK 621 G plasterer's tape is a crepe tape with a flexible PVC backing and rubber adhesive. At 30 mm wide and 33 m long, it provides enough material for masking and plastering work. The colour is white, the thickness is 0.12 mm, and the core has a diameter of 76 mm. The tape construction remains functional across a range of temperatures: −30 °C to +60 °C.

Suitable for masking and plastering

This single-sided adhesive masking tape meets typical needs for covering edges and surfaces during plastering. The rubber adhesive adheres reliably to substrates, while the flexible PVC backing conforms to contours and enables clean, straight edges. The white colour improves visibility during work.

Technical data for RK 621 G plasterer's tape

• Width: 30 mm
• Length: 33 m
• Thickness: 0.12 mm
• Core: 76 mm
• Backing: flexible PVC
• Adhesive: rubber
• Colour: white
• Temperature range: −30 °C to +60 °C

Construction: flexible PVC backing with rubber adhesive

The combination of flexible PVC backing and rubber adhesive offers good conformity to surfaces and reliable adhesion to typical substrates. The 0.12 mm thickness provides a good balance between removal quality and handling, while the 76 mm core improves the feel of the roll during use.

Application & practice

1. Prepare the surface so that it is dry and free of dust.
2. Apply the tape close to the edge and press down evenly.
3. Trim or remove protruding edges neatly.

Application notes

Before using the tape over a large area, a small trial is recommended to check adhesion and removal on the intended substrate. The width, length, thickness and core specifications refer to the specific RK 621 G type and support planning and stock management.