Krückemeyer · adhesive tape
RK 621 Plasterer's Tape - 1,250 mm x 33 m
RK 621 plasterer's tape – 50 mm x 33 m, flexible PVC backing, rubber adhesive. Yellow, -30 °C to +60 °C; suitable as masking tape during plastering.
Each variant is a separate article with its own page – your selection opens the sibling variant.
Fig. 01 — Product view
Product description
RK 621 plasterer's tape at a glance
The RK 621 plasterer's tape is a single-sided masking tape made of flexible PVC with a rubber adhesive. Yellow, 50 mm wide, 33 m long, 0.12 mm thick and with a 76 mm core. It is suitable as plasterer's and masking tape during plastering and painting, helping to create clean edges and seals.
The flexible PVC backing conforms to contours, while the rubber adhesive ensures reliable adhesion to substrates. With temperature resistance from -30 °C to +60 °C, it withstands typical climatic and processing conditions. The yellow colour provides good visibility against the substrate.
Suitable for masking and plastering indoors
This masking tape is designed specifically for plastering and covering work. It can be applied closely and flat to separate plastering or filling work from surrounding areas. Its 50 mm width allows longer contours and edges to be defined quickly, while its 33 m length provides sufficient material for several applications.
Technical data for RK 621 plasterer's tape
- Width: 50 mm
- Length: 33 m
- Thickness: 0.12 mm
- Core: 76 mm
- Backing material: flexible PVC
- Adhesive: rubber
- Colour: yellow
- Temperature resistance: -30 °C to +60 °C
Construction: flexible PVC backing with rubber adhesive
The flexible PVC construction provides flexibility and conformity to irregular surfaces. The rubber adhesive has good affinity with common substrates and can be peeled off cleanly, allowing edge areas to be covered reliably. The combination of width, thickness and core size supports stable application even over longer sections.
Practical advice
For a clean edge, position the tape on a dry, clean surface, apply even pressure and remove the covering in one pull while the filler is still workable. Extreme moisture or temperature fluctuations can affect adhesion and tearing behaviour; if necessary, test a short sample application.
Product Properties
| Adhesive | rubber |
|---|---|
| Length in m | 33 |
| Width in mm | 50 |
| Colour | yellow |
| Core in mm | 76 |
| Temperaturee resistance | minus 30°C to +60°C |
| Carrier material | flexible PVC |
| Thickness in mm | 0.12 |
Advice on this product
Krückemeyer technical support
Technical sales
Not sure whether this product fits your application? Our technical sales team checks your requirements, samples alternatives and quotes custom-made solutions.
Product consultation
Thomas Klein
Contact for products
Talk to Thomas Klein about your requirements and the right product.