RK 910 PVC Film - 100 mm x 33 m - white

RK 910 PVC protective film (51707) at a glance

RK 910 PVC film is a self-adhesive PVC film distinguished by its clear, white surface. It protects surfaces against scratches, dirt and minor damage during processing, transport or storage. As part of the protective films made of PVC film, it provides a robust barrier and a simple adhesive solution for smooth substrates.

The PVC film backing ensures even removal after bonding and lasting visibility of the surface. The rubber adhesive ensures reliable adhesion to many panel and metal surfaces but can also be removed when needed, depending on the temperature and substrate. At 100 mm wide and 33 m long, it covers large areas without frequent reapplication.

Suitable for covering surfaces in production and transport

Covering surfaces in production

The protective film protects sensitive surfaces from scratches, dust and minor damage during processing and mounting. The combination of PVC film and rubber adhesive ensures reliable adhesion to smooth substrates.

Transport & storage

During transport and storage, the film helps preserve an unblemished substrate and reduces subsequent damage from impacts or friction – particularly important for parts with a surface finish.

Technical data for RK 910 PVC film

• Width: 100 mm
• Length: 33 m
• Thickness: 0.13 mm
• Core: 76 mm
• Colour: white
• Backing: PVC film
• Adhesive: rubber
• Temperature resistance: -20 °C to +90 °C

Properties and benefits

The rubber adhesive provides reliable adhesion to smooth surfaces, effectively keeping scratches and contamination away. The width of 100 mm and length of 33 m allow larger areas to be covered quickly, reducing processing time. Temperature resistance from -20 to +90 °C increases flexibility of use in production halls, warehouses or mounting areas.

Application tips for RK 910 PVC film

1. Clean the surface thoroughly and wipe it dry.
2. Cut the film to the required length, allowing clearance at the edges.
3. Position the film, peel away the backing gradually and remove air bubbles with a smoothing tool.
4. Finally, press the film down firmly and check the edge.

Construction: PVC film with rubber adhesive

Backing

Backing: PVC film

Adhesive

Adhesive: rubber