3M APPLICATION TAPE RANGE
3M Application Tape
Application Tape helps transfer solid and plotted graphics. The range includes premasking and prespacing tapes with different adhesive strengths; the choice depends on the design, graphic surface and application process.
01
Selection criteria
Choose Application Tape for the graphic and surface
Consider the size and contours of the design, the outermost layer of the graphic, and the adhesive strength needed to pick up and release it. Premasking is primarily used for solid graphics; prespacing keeps separate plotted elements in place during transfer. Check suitability for the specific film and process.
02
APPLICATION TAPE RANGE
3M Application Tape in the range
The listing shows Application Tapes for graphic films, including premasking and prespacing versions with different adhesive strengths.
No products found
No products are currently listed in this category. Request a call back and we will help you find the right product.
Request a callback03
CHOOSING TAPE FOR GRAPHIC FILMS
Which Application Tape suits the graphic?
Large, solid graphics can call for a different tape from small lettering or intricate plotted designs. The range includes SCPM-44X with low adhesive strength for large graphics and SCPS-2 with higher adhesive strength for fine lettering. These differences do not replace a check of the specific film, printed layer and transfer process.
3M recommends checking whether the graphic can be transferred before approving the job. On textured surfaces, the graphic may lift when the tape is removed. Tell us the film type, design, surface and process so we can narrow down the choice with you.
04
APPLICATION TAPE QUESTIONS
When is Application Tape useful for a graphic?
Application Tape can support the manual transfer of solid and plotted graphics. With cut designs in particular, it keeps individual elements together during positioning. It is not needed or recommended for every graphic. The film construction, outermost layer and intended process determine whether to use it. Check that the particular design can be transferred before approving the job.
What is the difference between premasking and prespacing?
Premasking and prespacing have different roles within the Application Tape range. Premasking tapes are used for solid graphics; prespacing tapes keep plotted elements in position during transfer. The suitable version also depends on the size of the design, the graphic surface and the adhesive strength required. The category name alone does not establish suitability for every film or substrate.
How should the adhesive strength of Application Tape be chosen?
The adhesive strength must suit the particular graphic and its transfer. In this range, SCPM-44X is described as a low adhesion option for large graphics, while SCPS-2 has higher adhesion for fine lettering. Ink, clear coat or protective laminate also affect the choice. Compare the relevant product information and test removal on the intended graphic.
Is Application Tape suitable for textured substrates?
The 3M product information consulted does not recommend Application Tape for applying graphics to textured substrates. The graphic's initial adhesion may be too low, allowing it to lift from the substrate when the tape is removed. Review the surface, film and application process together before specifying a tape for this use.
05
Request advice
Describe the graphic film, design size, printed or protective layer, and substrate. Krückemeyer GmbH will discuss which Application Tape version should be assessed for the transfer.
Enquire about Application Tape for your graphic transfer
Tell us about the film, design and process. We will help you select a suitable transfer aid.
GRAPHIC FILM ADVICE
Thomas Klein
Contact for products
Thomas Klein will discuss your film, design and the appropriate transfer method with you.