RK 625 Blue floor marking tape - 50 mm x 33 m

Krückemeyer RK 625 Blue floor marking tape at a glance

The RK 625 Blue floor marking tape is a single-sided adhesive tape for colour marking floor surfaces in industrial and logistics facilities. It consists of plasticised PVC as the backing material, uses rubber as the adhesive and measures 50 mm in width and 33 m in length with a thickness of 0.15 mm and a 76 mm core. The blue marking increases the visibility of routes, zones and safety lines. The temperature range extends from -30°C to +60°C, allowing the tape to be used reliably in cooler halls or warm areas.

This floor marking tape can be applied quickly and cleanly to smooth, solid substrates and is designed for durable markings in demanding industrial environments.

Suitable for floor marking in production, logistics and workshops

Production and manufacturing

In manufacturing areas, the tape clearly identifies work zones, escape routes and walkways. Its blue colour makes it reliably distinguishable from other markings.

Warehousing, shipping and transport routes

On warehouse surfaces, the width and length dimensions of 50 mm x 33 m help to set up aisles or traffic routes quickly. These are durable and can be removed when necessary without damaging the substrate.

Technical data for RK 625 Blue floor marking tape

• Width: 50 mm
• Length: 33 m
• Thickness: 0.15 mm
• Core: 76 mm
• Colour: Blue
• Backing material: Plasticised PVC
• Adhesive: Rubber
• Temperature range: -30°C to +60°C

Flexible marking with reliable adhesion

The plasticised PVC backing conforms well to floor textures, producing an even marking. The rubber adhesive provides reliable adhesion to typical substrates such as concrete, screed or tiles, even in moderate moisture. The blue colour significantly increases visibility on industrial surfaces, contributing to employee safety.

Application and practical guidance

1. Clean the surface thoroughly and keep it dry.
2. Unroll the tape and remove the protective film.
3. Place it along the desired line and unroll it slowly, applying even pressure.
4. Press the edges down firmly and remove any air bubbles.
5. Carry out a final check of the marking and make any necessary adjustments.

Material combination for hard-wearing floor markings

Backing material

Plasticised PVC provides flexibility and good conformity to uneven floors, keeping contours clearly marked.

Adhesive

Rubber-based adhesive ensures lasting adhesion to common substrates in industrial environments.