Skip to main navigation Skip to main content Skip to page footer

Krückemeyer · adhesive tape

RK 525 Crepe Masking Tape - 1,230 mm x 2,200 m

Krückemeyer RK 525 crepe masking tape – 1,230 mm × 2,200 m with a specialty paper backing and acrylic adhesive, temperature-resistant up to +100 °C.

Adhesive: acrylate Item no. 51166

Each variant is a separate article with its own page – your selection opens the sibling variant.

Krückemeyer RK 525 Crepe Masking Tape - 1,230 mm x 2,200 m

Fig. 01 — Product view

RK 525 crepe masking tape at a glance

The RK 525 crepe masking tape from Krückemeyer is a single-sided adhesive crepe tape made of specialty paper that is particularly suitable for covering and masking work. With a width of 1,230 mm and a reel length of 2,200 m, it reliably covers large areas. Its thickness is 0.08 mm and the core has a diameter of 76 mm, allowing convenient handling on large rolls. The adhesive is acrylic and provides stable adhesion on smooth surfaces during painting and covering work. Its temperature resistance is up to +100 °C, so the tape remains reliable under moderate heat exposure.

This masking tape belongs to the adhesive tape category and the crepe tape subcategory, has a specialty paper backing and combines a wide range of uses with lasting adhesive strength.

 

RK 525 is specifically intended for covering and masking work. Its wide backing enables large areas to be covered quickly and produces clean edges. The acrylic adhesive offers good adhesion to painted and metal surfaces but can be removed without residue when needed, helping to minimise rework.

Technical parameters of RK 525 crepe masking tape

  • Width: 1,230 mm
  • Length: 2,200 m
  • Thickness: 0.08 mm
  • Core: 76 mm
  • Backing material: Specialty paper
  • Adhesive: Acrylic
  • Temperature resistance: up to +100 °C

  • Wide reel enables large areas to be covered quickly without frequent reel changes.
  • Stable acrylic adhesive provides strong adhesion on common surfaces while allowing removal without residue.
  • Large core (76 mm) makes reloading machines or roll stands easier.
  • Temperature resistance up to +100 °C increases reliability during work involving heat.

  1. Unroll the tape evenly along the contour.
  2. Press the tape down firmly to secure borders and edges.
  3. If necessary, use an edge to tear the tape neatly.
  4. Carefully remove the tape after completing the work to minimise adhesive residue.

Material structure of RK 525

Core and backing

The core measures 76 mm, allowing comfortable work over long distances. The backing consists of specialty paper, which offers a good balance of strength and ease of tearing.

Adhesive

The acrylic adhesive provides consistent adhesion on typical painting and covering surfaces and can be removed in a controlled manner without damaging the surfaces.

Adhesive acrylate
Length in m 2200
Width in mm 1230
Core in mm 76
Temperaturee resistance plus 100°C
Carrier material special paper
Thickness in mm 0.08

Sonderanfertigungen

Custom-cut rolls

Made-to-measure

Cross-wound spools

Kilometer-long narrow tapes

Sheet stock | Sheets

Custom dimensions

Adhesive die-cut parts

Custom 2D shapes

Adhesive dots

Custom diameters

Adhesive tapes

Custom dimensions

Krückemeyer technical support

Technical sales

Not sure whether this product fits your application? Our technical sales team checks your requirements, samples alternatives and quotes custom-made solutions.

Thomas Klein

Product consultation

Thomas Klein

Contact for products

Talk to Thomas Klein about your requirements and the right product.