RK 525 Crepe Masking Tape - 1350 mm x 50 m

RK 525 crepe masking tape at a glance

The RK 525 crepe masking tape from Krückemeyer is a single-sided adhesive masking tape made from specialty paper. With a width of 1350 mm and a length of 50 m, it provides broad coverage in a single operation. The adhesive is based on an acrylic adhesive that enables reliable adhesion to typical painting and industrial surfaces. The thickness is 0.08 mm and the core has a diameter of 76 mm. The tape construction is temperature-resistant up to +100 °C, providing safety during brief heat exposure in painting processes.

As a crepe tape, the roll can be flexibly adapted to contours and protects edges and surfaces against paint splashes. The combination of specialty paper backing and acrylic adhesive ensures good masking capability, easy removal without residue and good adhesion to smooth and slightly textured substrates.

Suitable for covering and contour work

With its broad coverage, RK 525 crepe masking tape makes covering larger areas easier in painting and coating processes. The high adhesion of the acrylic adhesive ensures stable masking, while the flexible crepe backing follows contours, curves and edges. In practice, this means less reworking and cleaner paint separation.

Covering work in painting and coating processes

Full coverage of strips or edge areas without splashing the edges makes work organization easier.

Masking contours

The crepe backing conforms to contours; guided tearing allows fast masking to the correct length.

Dimensions and properties

• Width: 1350 mm
• Length: 50 m
• Thickness: 0.08 mm
• Core: 76 mm
• Backing material: Specialty paper
• Adhesive: Acrylic
• Temperature resistance: +100 °C

Contour and masking capability

The acrylic adhesive provides reliable adhesion to many surfaces and allows controlled removal, saving time and simplifying masking. The broad backing of 1350 mm reduces the effort required to cover large areas.

• Broad coverage for efficient masking
• Flexible crepe backing follows contours
• Stable adhesion during painting

Application tips

1. Prepare surfaces: dust-free, dry and free from grease.
2. Apply tape along contours and press down evenly.
3. Press the edges down carefully and pull along the thread when tearing.

Construction and materials

Backing

Backing: Specialty paper with a crepe structure; provides good tear resistance and can be peeled off cleanly.

Adhesive

Adhesive: Acrylic – strong adhesion, temperature-resistant and suitable for a wide variety of substrates.

Temperature resistance up to +100 °C

The combination of adhesive and backing remains reliable even during brief temperature peaks; this minimizes the risk of peeling or melting through during drying processes.