RK 675 Self-Adhesive Edge Protection Profile

Overview of the RK 675 self-adhesive edge protection profile

RK 675 is an edge protection profile with a self-adhesive back. It uses PE foam as the backing material and has an acrylic adhesive. At 70 mm wide and 10 m long, it provides a robust solution for applications along edges. Its thickness is 5 mm, and the roll core has a diameter of 76 mm. The red version improves visibility and identification.

The combination of soft PE foam and strongly adhering adhesive creates a protective, cushioning edge that conforms well to irregular contours. The self-adhesive design allows quick installation without additional fasteners – suited to workpieces, packaging edges or furniture components.

Suitable for protecting edges

This profile protects the edges of various materials from impacts, scratches and wear. The acrylic adhesive provides a stable bond to typical surfaces such as wood, plastic and metal, while the PE foam acts as a shock absorber.

Technical data for RK 675

• Width: 70 mm
• Length: 10 m
• Thickness: 5 mm
• Core: 76 mm
• Backing material: PE foam
• Adhesive: Acrylic
• Colour: Red
• Designation: RK 675 self-adhesive edge protection profile

Self-adhesive with acrylic adhesive

The acrylic adhesive provides good adhesion to many surfaces and forms a lasting bond, even under changing loads. This keeps the edge protection reliably attached after repeated loading.

Construction and material combination

Construction: PE foam as the backing material provides a soft contact surface that reduces pressure, while the acrylic adhesive provides strong, long-lasting adhesion. This combination balances shock absorption and durability.

Application & practical use

1. Check the dimensions of the edge protection profile and cut it to size if necessary.
2. Peel the protective film from the adhesive.
3. Prepare the edge so it is clean, dry and free of grease.
4. Place the profile against the edge and press it down evenly.
5. Trim any overhanging edges if necessary.