RK 530 Crepe Masking Tape - 50 mm x 50 m

RK 530 crepe masking tape at a glance

The RK 530 crepe masking tape from Krückemeyer is a single-sided masking tape made of stabilised crepe. At 50 mm wide and 50 m long, it is suitable for covering and masking tasks. The core measures 76 mm, making it easier to use in common dispensers. Its adhesive construction is based on rubber, which enables reliable adhesion to many smooth substrates. The tape can be used from -30 °C to +80 °C and can briefly withstand 100 °C for 30 minutes.

Suitable for covering and contour work

With its single-sided adhesive coating, the tape bonds precisely where covering or masking is needed. The backing made of stabilised crepe provides good dimensional stability even around curved contours, edges and lightly textured surfaces.

Technical data for RK 530 crepe masking tape

• Width: 50 mm
• Length: 50 m
• Thickness: 0.13 mm
• Core: 76 mm
• Backing material: Stabilised crepe
• Adhesive: Rubber
• Temperature range: -30 °C to +80 °C
• Short-term exposure: 100 °C (30 minutes)

Construction: backing and adhesive

Backing: stabilised crepe

The stabilised crepe provides flexibility while retaining its shape, allowing the tape to adhere reliably even to curved surfaces.

Adhesive: rubber

The rubber adhesive provides good adhesion to smooth substrates and allows controlled removal of the tape after use.

Practical application tips

1. Check that the substrate is clean and free of grease or dust.
2. Pull the required length of tape from the dispenser and cut it if necessary.
3. Apply the tape evenly and press it down to ensure good adhesion.
4. After completion, remove it cleanly and carefully to avoid marks along the edges.