ALUMINIUM ADHESIVE TAPE · HEAT-RESISTANT
Heat-resistant aluminium adhesive tape
Heat-resistant aluminium adhesive tape combines an aluminium backing with an adhesive selected for the product. For masking, joining or reflecting heat, the tape construction and the conditions of your process determine the choice.
01
Selection criteria
Which properties matter when heat is involved?
Check the temperature at the bond line and how long it lasts, the substrate, and the tape's task: masking, joining or reflection. The range differs in aluminium backing, adhesive and versions with or without a liner. The temperature rating of the backing alone does not describe the resistance of the finished bond.
02
Aluminium tape under heat
Heat-resistant aluminium adhesive tapes in the range
The protected product listing shows aluminium adhesive tapes assigned the relevant property. Compare the construction and the specific product information for your process.
No products match this combination.
No products match all of the selected filter criteria.
03
Selection for thermal processes
Assess the aluminium backing and adhesive together
Aluminium adhesive tapes in the range use acrylic or silicone adhesives, among others. What matters is whether the tape bonds to your surface and what temperature the specific product tolerates in the intended application. For splicing and masking, a version with a liner may also be important. Tell us the substrate, temperature profile and required tape format; we will assess the appropriate version and a cut format for your application.
04
Questions about tape selection
How can I tell whether an aluminium tape suits my thermal process?
The data for the specific tape and the conditions at the bond line are decisive. An aluminium backing can reflect heat, but adhesion also depends on the adhesive, substrate and temperature profile. The range includes aluminium tapes with different adhesives and formats. Compare the product information with the actual duration of your process and the material being bonded. A blanket temperature approval for the whole category would not be reliable.
When is a liner useful on aluminium adhesive tape?
A liner can make cutting and the production of die-cut parts easier to handle. A liner version for die-cut production is documented for one aluminium tape design. Whether you need it depends on the shape, size and processing of your component. Tell us whether the tape should be supplied as a roll, a cut length or a shaped part, and how it will then be applied.
Can heat-resistant aluminium tape be used for masking and splicing?
Yes, these tasks are documented for individual aluminium adhesive tapes. Manufacturer information describes masking during anodising and splicing aluminium foil for suitable versions. That does not mean every tape suits both processes. The surface involved, thermal exposure, adhesive type and requirements for later removal or further processing determine the choice.
What information does Krückemeyer GmbH need to prepare a suitable cut format?
State what the tape must do, the substrate, the temperature at the point of use and how exposure changes over time. Add the required width or contour, intended delivery format and your processing steps. Krückemeyer GmbH can cut suitable adhesive tape for the application and produce die-cut parts. Whether the selected product and shape suit your process is assessed against the tape construction and application.
05
Request advice
Describe the substrate, temperature profile and required delivery format. Our adhesive technology team will work with you to assess which aluminium tape and cut format suit your process.
Enquire about aluminium tape for your process
Tell us about your application and the conditions at the bond line. We will clarify the product selection and the required converting format.
ADVICE ON ALUMINIUM ADHESIVE TAPE
Thomas Klein
Contact for products
Thomas Klein will discuss tape construction, thermal exposure and the required delivery format with you.