Krückemeyer · adhesive tape
Capra Grip I - Universal - Anti-slip tape red-white - 50 mm x 18.3 m
Capra Grip I - Universal - Anti-slip tape red-white - 50 mm x 18.3 m. Slip-resistant, chemical-resistant, temperature range -40 °C to +80 °C.
Each variant is a separate article with its own page – your selection opens the sibling variant.
Fig. 01 — Product view
Dimensions
| Width in mm | 50 mm |
|---|---|
| Length in m | 18,3 m |
| Thickness in mm | 0,72 |
Product description
Capra Grip I Universal anti-slip tape at a glance
The Capra Grip I Universal anti-slip tape is a single-sided adhesive tape with a PVC backing and solvent-based acrylic adhesive, protected by a silicone paper liner. The dimensions are 50 mm wide x 18.3 m long, with a thickness of 0.72 mm. The red-white striped surface increases visibility and is also suitable for marking areas. Within the Capra Grip range, it is one of the bestselling solutions.
The backing made of PVC delivers robust adhesion, while the adhesive, a solvent-based acrylic, enables good adhesion to many substrates. The liner consists of silicone paper, which allows easy unrolling and clean application. The combination of material and adhesive makes the tape resistant to everyday stresses.
Slip resistance and marking
The slip-resistant surface reduces the risk of slipping on walkways and work surfaces. The red-white marking increases visibility and supports clear routing in operational areas.
Technical data
- Width: 50 mm
- Length: 18.3 m
- Thickness: 0.72 mm
- Backing: PVC
- Adhesive: Solvent-based acrylic
- Liner: Silicone paper
- Color: red-white
- Temperature range: -40 °C to +80 °C
- Item number: 64981
- Brand: Krückemeyer
Construction: backing, adhesive and liner
- Backing: PVC
- Adhesive: Solvent-based acrylic
- Liner: Silicone paper
Application tips
- Clean the surface thoroughly before application and keep it dry.
- Peel off the protective liner and position the tape where required.
- Apply even pressure to achieve full adhesion without bubbles.
- Trim overlaps or edges as needed and round them off neatly.
Product Properties
| Klebstoff | Loesemittelacrylat |
|---|---|
| Abdeckung | Silikonpapier |
| Temperaturee resistance | minus 40 °C bis plus 80 °C |
| Trägermaterial | PVC |
Sonderanfertigungen
Custom-cut rolls
Made-to-measure
Cross-wound spools
Kilometer-long narrow tapes
Sheet stock | Sheets
Custom dimensions
Adhesive die-cut parts
Custom 2D shapes
Adhesive dots
Custom diameters
Adhesive tapes
Custom dimensions
Advice on this product
Krückemeyer technical support
Technical sales
Not sure whether this product fits your application? Our technical sales team checks your requirements, samples alternatives and quotes custom-made solutions.