Krückemeyer · adhesive tape
Capra Grip I - Universal - Yellow anti-slip tape - 50 mm x 18.3 m
Krückemeyer Capra Grip I – Universal yellow anti-slip tape, 50 mm x 18.3 m; slip-resistant, marking, -40 to +80 °C.
Each variant is a separate article with its own page – your selection opens the sibling variant.
Fig. 01 — Product view
Product description
Capra Grip I – Universal yellow anti-slip tape at a glance (70035)
The yellow Capra Grip I Universal anti-slip tape is a single-sided adhesive tape that enables secure contact on surfaces prone to slipping. With a width of 50 mm and a length of 18.3 m, it offers a long service life in industrial environments. The PVC backing provides dimensionally stable surfaces, while the solvent-based acrylic adhesive enables reliable adhesion to a wide variety of substrates. The silicone paper liner protects the adhesive surface until application. The tape is slip-resistant and is also suitable for marking areas in working environments. Its temperature resistance ranges from -40 °C to +80 °C, making it ideal for cold production areas through to hot circulation zones. The product is also considered a bestseller.
Suitable for slip-resistant surfaces
Industrial and work areas
On heavily used surfaces in industrial environments, Capra Grip I provides a reliable slip-resistant effect without damaging the substrate material.
Area identification
The yellow colour supports visible markings in production lines and warehouses without requiring additional labelling.
Environments requiring chemical resistance
As it is identified as chemical-resistant, the tape is also suitable for areas where chemical substances may occur or escape.
Technical data for Capra Grip I
- Width: 50 mm
- Length: 18.3 m
- Thickness: 0.72 mm
- Backing material: PVC
- Adhesive: Solvent-based acrylic
- Liner: Silicone paper
- Temperature resistance: -40 °C to +80 °C
Construction and choice of materials
- Backing: PVC
- Adhesive: Solvent-based acrylic
- Liner: Silicone paper
Application tips
- Prepare the surface area so it is clean, dry and grease-free.
- Unroll the tape, check its length and observe safety clearances.
- Place the adhesive side on the surface and apply it with even pressure.
Product Properties
| Adhesive | solvent-based acrylate |
|---|---|
| Release liner | silicone paper |
| Length in m | 18.3 m |
| Width in mm | 50 mm |
| Temperaturee resistance | minus 40 °C to plus 80 °C |
| Carrier material | PVC |
| Thickness in mm | 0.72 |
Sonderanfertigungen
Custom-cut rolls
Made-to-measure
Cross-wound spools
Kilometer-long narrow tapes
Sheet stock | Sheets
Custom dimensions
Adhesive die-cut parts
Custom 2D shapes
Adhesive dots
Custom diameters
Adhesive tapes
Custom dimensions
Advice on this product
Krückemeyer technical support
Technical sales
Not sure whether this product fits your application? Our technical sales team checks your requirements, samples alternatives and quotes custom-made solutions.
Product consultation
Thomas Klein
Contact for products
Talk to Thomas Klein about your requirements and the right product.