Krückemeyer · adhesive tape
Capra Grip I - Universal - Neon yellow anti-slip tape - 50 mm x 18.3 m
Capra Grip I – Universal neon yellow anti-slip tape, 50 mm x 18.3 m. Slip-resistant, PVC backing, solvent-based acrylic adhesive, silicone paper liner.
Each variant is a separate article with its own page – your selection opens the sibling variant.
Fig. 01 — Product view
Product description
Capra Grip I 68841 at a glance
Capra Grip I 68841 is a single-sided anti-slip tape from the Krückemeyer brand for industrial applications. In neon yellow, it provides good visibility and increased workplace safety. With a width of 50 mm and a length of 18.3 m, it supplies long strips for a variety of applications. The PVC backing provides dimensional stability, while the adhesive made from solvent-based acrylic ensures reliable adhesion to different substrates. The liner consists of silicone paper, enabling easy application. The thickness is 0.72 mm and the temperature resistance ranges from -40 °C to +80 °C. The product is a bestseller in the anti-slip category.
The neon coating also serves to mark hazard zones and increases visibility even in poor lighting or on wet surfaces.
Visibility and safety at work
Visibility and identification
The neon yellow colour makes it easier to identify areas, stair treads or sections and supports rapid risk communication in the working environment.
Slip resistance on textured surfaces
With the slip-resistant backing in PVC and the solvent-based acrylic adhesive, the tape remains firmly adhered even in the presence of moisture. This ensures reliable footing over a long service life.
Technical data for Capra Grip I 68841
- Width: 50 mm
- Length: 18.3 m
- Thickness: 0.72 mm
- Backing material: PVC
- Adhesive: Solvent-based acrylic
- Liner: Silicone paper
- Colour: neon yellow
- Temperature resistance: -40 °C to +80 °C
High visibility and safe marking
The neon yellow colour increases awareness of hazard zones. Combined with the slip-resistant surface, Capra Grip I improves operational safety.
- Slip-resistant effect: reliable footing on wet or smooth floors
- Stable hold: adhesion provided by solvent-based acrylic adhesive
- Chemical resistance: suitable against typical chemicals (category c)
- Temperature tolerance: functional from -40 °C to +80 °C
Application & practical guidance
- Check that surfaces are clean, dry and free of oil
- Align and unroll the tape
- Peel off the silicone paper
- Press the tape down firmly and carefully smooth the edges
Construction: PVC backing, solvent-based acrylic adhesive and silicone paper
Backing
The PVC backing ensures dimensional stability and good durability during industrial activities.
Adhesive
The solvent-based acrylic adhesive ensures strong adhesion to a wide variety of substrates and remains reliable during temperature fluctuations.
Liner
The silicone paper liner protects the adhesive system until application and prevents premature sticking.
Product Properties
| Adhesive | solvent-based acrylate |
|---|---|
| Release liner | silicone paper |
| Length in m | 18.3 m |
| Width in mm | 50 mm |
| Temperaturee resistance | minus 40 °C to plus 80 °C |
| Carrier material | PVC |
| Thickness in mm | 0.72 |
Sonderanfertigungen
Custom-cut rolls
Made-to-measure
Cross-wound spools
Kilometer-long narrow tapes
Sheet stock | Sheets
Custom dimensions
Adhesive die-cut parts
Custom 2D shapes
Adhesive dots
Custom diameters
Adhesive tapes
Custom dimensions
Advice on this product
Krückemeyer technical support
Technical sales
Not sure whether this product fits your application? Our technical sales team checks your requirements, samples alternatives and quotes custom-made solutions.
Product consultation
Thomas Klein
Contact for products
Talk to Thomas Klein about your requirements and the right product.