Capra Grip I - Universal - Anti-slip tape white - 50 mm x 18.3 m

Capra Grip I at a glance (72019)

The Capra Grip I Universal anti-slip tape series from Krückemeyer offers a slip-resistant surface on a PVC backing. The tape is bonded using a solvent-based acrylic adhesive and is supplied with a silicone paper liner for protection. With a 50 mm width and 18.3 m length, it is suitable for wide surfaces and long application runs.

The tape is slip-resistant and suitable for industrial applications: stair treads, work surfaces and conveyor belts in demanding environments. Its temperature resistance extends from -40 °C to +80 °C, enabling use both indoors and outdoors. Its chemical resistance increases service life in areas with lubricant films or typical reagents.

Technical data for Capra Grip I

• Width: 50 mm
• Length: 18.3 m
• Thickness: 0.72 mm
• Backing: PVC
• Adhesive: Solvent-based acrylic
• Liner: Silicone paper
• Temperature range: -40 °C to +80 °C
• Components: Anti-slip tape – bestseller

Construction & materials

Construction: PVC backing with solvent-based acrylic adhesive and silicone paper liner. This combination of materials ensures stable adhesion to smooth and slightly textured surfaces and good slip resistance throughout the temperature range.

Application and attachment

1. Clean the surface and keep it dry
2. Cut the tape to the required size and determine its position
3. Stick the tape onto the surface and press down evenly
4. Remove the liner paper and ensure further pressure is applied